Image Gallery
Click on the image below to access our image bank that you can use in your marketing materials and on your website.
W.S. Tyler & RO-TAP® Logo
Click on the image below to access our W.S. Tyler and RO-TAP logos.
CARE AND CLEANING OF TEST SIEVES
A Test Sieve is a precision scientific instrument.
- Care should be taken when handling a Test Sieve to avoid damage to the
frame and the sometimes delicate and sensitive Test Sieve mesh. - Test Sieves should be cleaned after each use.
- Test Sieves should be stored in a clean, dry, and controlled environment.
- Test Sieves should be inspected regularly for mesh damage.
For proper cleaning, a soft bristle brush should be used.
- Turn the Test Sieve over a receiving pan and gently brush the underside of the mesh, using a circular motion. DO NOT apply excessive pressure.
- Gently tap the Test Sieve frame with the brush handle to remove any particles that may cling to the frame.
Sieves may be washed in a warm water, synthetic detergent solution.
- The Test Sieve must be dried before the next use.
- An oven may be used in the drying process, with temperature not to exceed 190ºF.
- An ultrasonic bath may also be used to clean Test Sieves (review cleaning unit instructions prior to use).
