RO-TAP RX-29 & RX-30
Download RO-TAP RX-29/RX-30 Tear Sheet
The industry standard in test sieve shakers, W.S. Tyler’s Ro-Tap® has a unique two dimensional operation: a horizontal, circular motion and a vertical, tapping motion. This special action allows material particles to stratify and “seek” critical openings in the test
media. This unit provides the most accurate and consistent particle analysis testing. The RX-29 model is designed for testing with 8" diameter test sieves; the RX-30 model is designed for testing with 12"diameter test sieves.
FEATURES
- Testing applications — RX-29: 2" down
through 635 mesh (20 micron); RX-30: 4"
down through 500 mesh (25 micron). - Requires minimal maintenance.
- Heavy-duty use.
- Features 99 minute digital timer/clock.
Tolerance is +/- .1 of a second. - Each unit is test run and serialized.
- Newly designed easy lock clamping system.
NUMBER OF SIEVES
RX-29
Full Height: 6 Sieves w/FH Pan
Half Height: 13 Sieves w/HH Pan
RX-30
Full Height: 4 Sieves w/FH Pan
Half Height: 8 Sieves w/HH Pan
SPECIFICATIONS
- Oscillations per Minute: 278± 10
- Oscillations Displacement: 1" x .75"
- Taps per Minute: 150± 10
- Hammer Weight; 5 lbs., 6 oz.
- Weight- Unit 180 lbs. Shipping 190 lbs.
- Dimensions: Unit = 28” wide x 21” deep
x 25” high (71cm x 54cm x 64cm)
Shipping = 31” wide x 23” deep x 30” high
(77cm x 59cm x 77cm)
Download RO-TAP RX-94 Tear Sheet
The RX-94 Test Sieve Shaker utilizes the same traditional design as the RX-29 model. In addition, the unit features a cavity that allows for two “stacks” of 8 in. or 200 mm diameter test sieves. This allows for twice the processing capacity in nominally the same time required to complete one test. The RX-94 model is designed for use with 8 in. or 200 mm diameter test sieves only and feature a newly designed easy lock clamping system. Each unit is test run and serialized prior to shipment and features a 99-minute digital timer with a tolerance of .1 seconds.
FEATURES
- Designed for use with 8" or 200mm diameter test sieves only.
- A newly designed easy lock clamping system
- Testing application: 2" down through 635 mesh (20 micron).
SPECIFICATIONS
- Oscillations per Minute: 278± 10
- Oscillation Displacement: 1" x .75"
- Taps per Minute: 150± 10
- Hammer Weight: 5 lbs., 6 oz.
- Weight: unit -220lbs. Shipping- 242 lbs.
- Dimensions- Unit- 30” wide x 27” deep x 26” high (75cm x 68cm x 56cm)
Shipping – 31” wide x 31” deep x 30” high (77cm x 78cm x 75cm)
RO-TAP SIEVE SHAKER MAINTENANCE KITS
Download RO-TAP Maintenance Kits Tear Sheet
To ensure lasting dependable service, Ro-Tap® Sieve Shakers must occasionally be maintained with parts that are long-wearing, durable, and cost-effective. Maintenance kits are available for the replacement of parts due to normal wear and tear. W.S. Tyler recommends the use of these kits as a means to minimize down-time due to minor repairs. The purchase of a minor maintenance kit is also recommended with each new Ro-Tap® Sieve Shaker.
• Minor Maintenance Kit for Models Rx-29, RX-30, and RX-94
• Major Maintenance Kit for Models RX-29 and RX-30 (pictured)
The RX-230 Spinning Riffler uses a vibratory feeder to provide a constant flow of material from the stainless steel hopper.
The vibrating feeder then feeds the sampling tubes from 1 to 16 individual samples. Each sample can then be capped and stored immediately, with minimal handling and little chance for outside contamination. Spin riffling is the method of choice for sampling accuracy and reliability for dry, free flowing particles. This unit will virtually eliminate operator error and bias associated with other types of sampling devices.
The RX-230 Spinning Riffler includes a sixteen-port dividing head, a set of sixteen standard tube sample vessels, a sample drum to contain the vessels and a hopper plate for positioning the vessels in the drum. All of these parts are available as replacement parts.
The RX-230 Spinning Riffler includes:
- A sixteen-port dividing head
- A set of sixteen standard tube sample vessels
- A sample drum to contain the vessels
SPECIFICATIONS
- Weight: 25 lbs.
- Dimensions: 13” x 20.5” x 23”
- A hopper plate for positioning the vessels in the drum
- Two power supply cords for 110v and 220v
